FSP Hydro PTM PRO 1200W 80 PLUS Platinum ATX 3.0 Fully Modular Power Supply – Black

1200W of 80 PLUS Platinum power with a native 12VHPWR connector and a fan that stays off below 30% load.

Quick Specs

• 1200W, 80 PLUS Platinum, ≥92% efficiency at 50% load
• ATX12V 3.0 with native 12VHPWR (PCIe 5.0) connector
• Fully modular with all-black ribbon cables
• 135mm FDB fan with ECO switch (fan off below 30% load)
• Japanese 105°C capacitors; 10-year warranty

Built for High-End GPUs

This is a unit for top-tier graphics cards and heavy workstation loads. A single +12V rail delivers up to 100A, the native 12VHPWR connector powers PCIe 5.0 cards without adapters, and 6+2-pin PCIe leads cover older cards. The full-bridge LLC design with DC-DC conversion holds voltage regulation within ±1%, and FSP adds conformal coating against humidity and dust. With the ECO switch on, the 135mm fluid-dynamic-bearing fan stays off until the load passes 30%, so light use and idle are silent.

What to Check

At 190mm deep, it is longer than a typical 140–160mm ATX power supply, so check your case's PSU clearance and leave room for the modular cables behind it. It is an ATX 3.0 unit with the original 12VHPWR connector rather than the newer ATX 3.1 12V-2x6 cable; it still plugs into current graphics cards, but make sure the connector is pushed fully home. If your system draws well under 600W, 1200W is more than you need, and a smaller unit will cost less and spend more of its time in its efficiency sweet spot.

FEATURES:

• Complies with ATX12V 3.0 and EPS12V 2.92
• Powerful single +12V rail design
• Full-bridge LLC with DC-DC, ±1% voltage regulation
• Conformal coating for humidity and dust protection
• Changeable side stickers

SPECIFICATIONS:

• Model: FSP Hydro PTM PRO 1200W (HPT2-1200M)
• Rated Output: 1200W
• Efficiency: 80 PLUS Platinum, ≥92% at 50% load
• Standard: ATX12V 3.0, EPS12V 2.92
• Form Factor: ATX
• Modular: Fully modular
• Fan: 135mm FDB, ECO mode (fan off below 30% load)
• Capacitors: Japanese 105°C electrolytic
• AC Input: 100–240V, 14–9A, 50–60Hz, active PFC
• +12V Output: Single rail, 100A
• Connectors: 1 x ATX 20+4-pin, 3 x CPU 4+4-pin, 1 x 12VHPWR, PCIe 6+2-pin, 14 x SATA, 5 x Molex, 1 x Floppy
• Protections: OCP, OVP, SCP, OPP, OTP, UVP
• Dimensions: 150 x 190 x 86mm
• Weight: 2.03kg
• Warranty: 10 Years

WHAT'S IN THE BOX:

• FSP Hydro PTM PRO 1200W power supply – Black x1

Why FSP?

FSP is a long-established Taiwanese power supply manufacturer, and it builds the Hydro PTM PRO with conformal coating and Japanese capacitors for long service life. It comes with a 10-year warranty, handled directly through AZOnline.